70 Challenger Right Fender Pentastar Question

[7E-Bodies]

I found the reference material thread for placement, drilling etc of the Challenger right fender pentastar, but the repop I have has no fasteners. Just the two stems. Can't think of the name of those stamped out nuts, but does it take one of those or a push type metal clip?

[Rich G.]

I just pushed it on with a dab of silicone.

[tman]

Should be friction fit w/o any fastener.  The larger pin is a fastener in itself.  That's how mine works.

[anlauto]

Should be friction fit w/o any fastener.  The larger pin is a fastener in itself.  That's how mine works.

[Ramman]

I call what you're describing, Palnuts.

[70/6chall]

I believe the clip your referring to is called a barrel clip. But like everyone else says they do is it's a press in fit. Use a little silicone if you like should work.

[Chryco Psycho]

Looks to me that the retainer tabs on the one you have are broken off when removing it in the past .