Main Menu

Advice on polishing tail light lenses

Started by ksierens, August 18, 2017, 12:52:39 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

ksierens

Looking for some advice on the best way to polish my tail light lenses.
1970 Challenger R/T 440 Six Pack 4 Speed Dana 3.54

Rev-It-Up

This is what I used on my Challenger lenses years ago. It worked fantastic! Took a bit of elbow grease,  but it came out great.

https://www.yearone.com/Product/1964-72-cutlass-442/pk45
Rev-It-Up

Cuda Cody



1 Wild R/T

Mothers Mag polish.....  Depending on how involved you want to get you can just polish them with Mothers & a rag or.......

rebelyell

 :unbelievable:

I'm doing this soon. I didn't even know you could polish them.

Burdar

I've used MeGuiars Plastx.  It does a decent job.  I've heard you can use toothpaste as well.

Floyd

I have wet sanded (as shown) and used a combo of No 1 and 2 of this with good results. 

https://www.novuspolish.com/

You can get it via Amazon or eBay.


shawge

Used MeGuiars Plastx with a foam pad on a drill with decent results.
1970 Challenger, 451 MS3Pro EFI
Colored wiring diagrams
Wheel spreadsheet

ksierens

Thanks everyone, I ended up using the Plast-X with good results.  :twothumbsup:
1970 Challenger R/T 440 Six Pack 4 Speed Dana 3.54