Main Menu

Vinyl top trim holes

Started by B5fourspeed, November 07, 2018, 02:55:12 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

B5fourspeed

Does someone have pictures of the vinyl top trim holes locations for a Barracuda?

anlauto

Lay your trim down in a nice comfortable place on the car, make sure it's equal on both sides, hold it in place with tape, draw a pencil line on both edges of the trim and then drill your holes in the center of the lines :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Rich G.

I know the holes are 1-1/4 down from the first bend on the deck filler panel. I just replaced one today. I don't have the measurements on the spacing right now but if you need them I'll let you know. The ones on the quarter you'll have to mark after its on . Lay it out after you mark it Before you drill any holes!


B5fourspeed

Alan,do you use all 16 of the fasteners for the vinyl top trim?

anlauto

Quote from: B5fourspeed on February 22, 2019, 10:18:40 AM
Alan,do you use all 16 of the fasteners for the vinyl top trim?

Used 14 on the Challenger we just did :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

B5fourspeed