Window fuzzy locations

[leglhi]

So went to install glass last night and after installing the passenger side and half way through the drivers side realized that the driver side door had these fuzzy type window guides on the door.The passenger side was missing these as the body shop had removed  every damn thing from the doors but apparently left the top driver side ones attached.So searching around i found a bag with the passenger side pieces along with about 4 others.I cant find any mention of these in the manual for location reference.Obviously i know where the two top ones go by looking at the drivers side,and also the one above the door handle area.But I'm at a loss on where the others are unless the quarter windows also have some.Can anybody help me with locations?I think i need to buy all brand new ones as the felt is worn on them and i don't want to scratch my new glass.The good news....my windows roll up and down like a dream! Now i have to pull the glass out of both doors to install these things 

[Cuda Cody]

Yes, quarter windows get the fuzzies.  The year matters.  1970 is a 1 year only and attaches different.  Make sure you know what year your doors are if they have been replaced?

[leglhi]

Thanks Cody,i believe the doors to be original.I've known the previous owner since the early 80's,and i know of the owner before that so i have a decent history on it.There definately was some shoddy body work done along the line for rust repair but no panels replaced.Everything looks to be 70.A few look like i could get to them by pulling the bottom stop from the door,but i think overall the glass has to come back out and i need to order new guides.Do you know of where i can find the mounting locations,and is Roseville the go to for those also.Thanks man.

[Cuda Cody]

Are you asking about the mounting locations for the fuzzies?  In 1970 they clip in.  Really easy to install.

[HP_Cuda]

Are you talking about the window felt that attach to the door panel? Like the pic?

or are you talking about these (guides) from Roseville?

http://www.rosevillemoparts.com/product_info.php/p/window-stabilizer-bracket-1970-71-e-body/products_id/9435

[leglhi]

Sorry for the confusion Cody.I wasn't sure the correct terminology for the piece.Yes HP_CUDA,the guides from Roseville is what I'm referring to.I can see where two go against the door skins on top by the whiskers and then the stops go on either side of doors.So i believe there are 4 per door.Two get bolted in with slides,and two have screws attaching them with  no adjustment.I then have 4 left over that i assume means two per 1/4 window glass but i cant find the locations for mounting them.So I'm looking for the material that covers the front window guides as mine is pretty trashed.Dave did get back to me yesterday and mentioned that a lot of guys use the soft side of Velcro and glue that over the existing material.Otherwise he said you need to buy complete new guides.I think that may be what i do.Don't want the new glass scratched.I already need to buy new 1/4 glass because when they welded in the old rollbar 30 years ago they pitted the glass .Just saw that lastnight and its not going to fly with the new side glass.