convertible top chrome clips

[1970 FM3 Cuda]

1970 challenger convertible chrome clips. Looking for picture or part number for the clips that hold the chrome strip around a convertible top. This chrome is the same chrome the boot cover clips to. I also need clip spacing / measurements.

I am also looking for black back interior panels for the same car.

Thanks in advance for help.

[anlauto]

Classic Industries sells the clips in a set for both sides and the rear piece

https://www.classicindustries.com/product/1970/plymouth/all-models/parts/me12228.html

[1970 FM3 Cuda]

 thank you, I looked at them and didn't not think they were correct. I thought those are for the inner boot. I will order them; they are back order so hopefully not back order for months like everything else is.  thanks again.

[anlauto]

You can likely find them at other vendors, I think Roseville sells them individually too

[Daveh]

I ordered them from Jegs months ago and they are still back ordered.  I think they all are, I couldn't find them anywhere.  If you find them in stock can you please let me know.  Thanks

[cudaize]

R/T Specialties sells these, which are technically only correct for curved side pieces.  The fellow who had these made for his own cars and sold the rest to Tom at R/T told me that he used these on all three pieces.  My recollection is that there are holes all the way around the well so it technically can be done.  I would just make sure that the heads of the screws will not abrade the top material.

http://www.rtspecialties.net/proddetail.php?prod=6002976

[anlauto]

R/T Specialties sells these, which are technically only correct for curved side pieces.  The fellow who had these made for his own cars and sold the rest to Tom at R/T told me that he used these on all three pieces.  My recollection is that there are holes all the way around the well so it technically can be done.  I would just make sure that the heads of the screws will not abrade the top material.

http://www.rtspecialties.net/proddetail.php?prod=6002976

The kit I posted from Classic includes both different clips... https://www.classicindustries.com/product/1970/plymouth/all-models/parts/me12228.html .  I ended up buying the new reproduction trim and they came with clips....then I sold my original trim for more $$$