Main Menu

Bulkhead connector fasteners

Started by Djdimart64, May 10, 2019, 06:50:41 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Djdimart64

Can someone tell, or better yet, show me what the bulkhead connector screws thread into on the engine side of the firewall. As I have stated in previous posts, my car has been apart for a really long time and a lot of the fasteners I had bagged and tagged got thrown out.


Please help

Thanks,

Dave D

Cuda Cody

Are you talking about the 2 screws that hold the wiring bulkhead to the firewall?

Chryco Psycho

They look like a self tapping screw but with a blunt tip & use a sheet metal stamped nut


Djdimart64

Yes Cody, they are the screws I am talking about. I have the screws, just need the nuts for the other side.

Djdimart64

Thanks for the reply, I see the parts needed in the second photo Cody posted, now I just need to find them somewhere. Any ideas?

chargerdon

Just take the screws to a good hardware store !! 



6Pack70

Pal nuts with sealer inside. Exactly the same diameter as a dime.   These are the originals from my AAR.  They will clean up nice and do not have any pitting.  PM me your address and I'll send them to you if you need them.    Eddie

Djdimart64

Thanks for the offer, I just ordered new ones.