Firewall Bulkhead Connector

[BIGSHCLUNK]

Is it possible to buy just a few of the spade connectors? I dont need to replace all of them. Also the correct crimping tool, seems there was a post on that  somewhere , but its been awhile

https://www.ebay.com/itm/Mopar-70-74-Challenger-Cuda-71-74-Charger-GTX-Firewall-Bulkhead-Connector-NEW/372131566927?hash=item56a4c5154f:g:FMAAAOSw4shX7VyU&vxp=mtr

I do plan on replacing the bulkhead connector as well. Hoping the majority of spade connectors come apart wihout issue.

[realn96]

https://www.ebay.com/itm/64-74-Mopar-A-B-E-C-Body-Cuda-14-16-Gauge-Male-Female-Wiring-Harness-Terminals/382425325653?hash=item590a536055:g:98YAAOSwpONZW7Ix

[quapman]

I've gotten them on ebay and I think one of the fastener companies sells them as well.

[RUNCHARGER]

Pico makes them however I don't have the part # handy.

[shawge]

Pretty sure they are Packard 56 connectors
http://www.clipsandfasteners.com/searchresults.asp?Search=packard

Can get them at the box stores too (NAPA, AZ) too but they might be special order. 

[BIGSHCLUNK]

Thanks that will help for sure!

Now ... the proper crimping tool?  Seems there was a thread about this on CC.... but long ago 

[Chryco Psycho]

https://www.ebay.com/itm/NEW-RALLY-standard-DASH-HARNESS-BULKHEAD-BLOCK-70-71-72-73-74-CUDA-CHALLENGER/162157961595?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649