Quartz clock battery extension

[JunkYardFind]

Well after a couple years of messing with the mechanical OEM standard clocks (and stems), I have finally given up and focused on the quartz conversions. I have had one in my Cuda for awhile and it works perfectly.... until the battery runs out :/

I then proceed to tear apart the dash once again and replace the tiny battery, PITA to say the least! Out of frustration I have devised a kit that solves this problem.

It's a fairly simple kit that extends the battery externally to anywhere you want under the dash or glove-box. Find the pics below and ebay link here... https://www.ebay.com/itm/403655850526

Hope this helps!

[Katfish]

What about a simple converter, then you never have to worry about a battery.

https://www.ebay.com/itm/115065636123?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=BZyfaXpORyq&sssrc=2349624&ssuid=H_AJQQbeTXe&var=&widget_ver=artemis&media=COPY

[DeathProofCuda]

What kind of quartz clock conversion are you running that you have to use a battery to power it?  My quartz converted dash mounted clock runs off the original 12 volt power feed to the clock.