Main Menu

Reverse dash light wire routing

Started by GoMangoBoys, July 26, 2023, 02:05:32 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

GoMangoBoys

I need to know where the wire for the reverse dash light routes thru the firewall.

Also, thanks again to Mike Ross for having a dash laying around where I could get dimensions for the hole location for the light.  Our car was born as an automatic and we have no hole in the dash.  While I was there, i forgot to ask where to route the wire.

usraptor

Here you go.  Between the bulk head connector and brake cylinder cut outs.

GoMangoBoys

Thank you @usraptor .  Based on your picture, I found the simple in the firewall where the hole goes.  Unfortunately,  the car is assembled and it is behind the brake booster.  I will probably just put a hole somewhere else that I CAN get to without taking a lot of stuff apart.