Main Menu

Turn signal switch cam. Correct one? 71 Challenger.

Started by DamianC, February 11, 2020, 06:38:06 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

DamianC

Hi guys.

I have a 71 Challenger that had a broken turn signal cam (wouldn't stay in the right turn position). So I bought a replacement cam no problem, but realized once I could see the old one that it has three wires on the plate that secures the cam in place, the replacement I bought only has two. My new cam is missing the TAN coloured wire pictured. Am I right in saying that is for cornering lights? I don't think my car has cornering lights. Can I use the two wire replacement cam or do I have to buy the correct switch assembly? Thanks very much.

Chryco Psycho

The cornering lights are on a separate 3 wire plug so I doubt you switch has those & will need all 3 wires

DamianC

Thanks Chryco Psyco. I appreciate your help. I will look at ordering a the proper part.


Chryco Psycho

Standard Part # TW7 is correct or you can talk to Jim @ JSRestorations about a rebuilt one

DamianC

Quote from: Chryco Psycho on February 12, 2020, 11:05:20 AM
Standard Part # TW7 is correct or you can talk to Jim @ JSRestorations about a rebuilt one

Thanks very much!

Chryco Psycho