Main Menu

440 Build Question

Started by edison1970, May 16, 2018, 06:13:59 PM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

303 Mopar

Quote from: Brads70 on August 17, 2018, 04:59:34 AM
Quote from: 1 Wild R/T on August 11, 2018, 06:56:02 PM
These days I like the Beehive springs, they fit without concerns about what valve seals or what rocker., they do a good job controlling the valves & they aren't to costly..... But you probably can't return what you have so you need to look at PC type seals...   In order to select  the proper part you need an accurate I/D of the springs & the O/D of the valve stem (.375) & the top of your guides...

:iagree:
I went with beehive springs from Lunati that match their cam for rocker clearance. Still happy with them 5 years later....

I broke 2 beehive springs on my 505, could've just been me though.... :burnout:

Chryco Psycho

Could have been me , I drove it too  :burnout:

1 Wild R/T

Quote from: 303 Mopar on August 17, 2018, 08:01:02 AM
Quote from: Brads70 on August 17, 2018, 04:59:34 AM
Quote from: 1 Wild R/T on August 11, 2018, 06:56:02 PM
These days I like the Beehive springs, they fit without concerns about what valve seals or what rocker., they do a good job controlling the valves & they aren't to costly..... But you probably can't return what you have so you need to look at PC type seals...   In order to select  the proper part you need an accurate I/D of the springs & the O/D of the valve stem (.375) & the top of your guides...

:iagree:
I went with beehive springs from Lunati that match their cam for rocker clearance. Still happy with them 5 years later....

I broke 2 beehive springs on my 505, could've just been me though.... :burnout:

If you lost two & most folks never break one I'd suspect there was something wrong in the setup or you have crazy radical cam.... 

They are proven enough that GM uses them in the LS engines & Ford uses them in the Coyote... While they were new tech around 2000 they are pretty accepted these days...


303 Mopar

Quote from: 1 Wild R/T on August 18, 2018, 08:32:17 AM
Quote from: 303 Mopar on August 17, 2018, 08:01:02 AM
I broke 2 beehive springs on my 505, could've just been me though.... :burnout:

If you lost two & most folks never break one I'd suspect there was something wrong in the setup or you have crazy radical cam.... 

They are proven enough that GM uses them in the LS engines & Ford uses them in the Coyote... While they were new tech around 2000 they are pretty accepted these days...

Quote from: Chryco Psycho on August 17, 2018, 11:03:47 PM
Could have been me , I drove it too  :burnout:

See what happens boys and girls when you let others drive your car...... :vipermanhiding: