70 Challenger vapor hose guard

[Mopar5]

Hello I'm hoping to find someone who has a photo of how the guard attaches under the right quarter.Thanks in advance

[floorit426]

I dug around, but this is the best I can do. The narrower piece passes through the rear subframe and is fastened to the larger piece, with a sheetmetal screw. I just did this, on my cuda, and it's pretty straightforward. I'd take a couple of pics, but it really is hard to see, with the muffler in place. I'm sure some members have better pictures.

[Mopar5]

Thank you very helpful, So the larger part screws into the flange at the bottom of the wheel house?

[floorit426]

Yep!

[Mopar5]

Thanks again ,Very much appreciated.

[70vert]

hmm, I'm not familiar with this set up. I've got nothing like it on my '70. I know some engines have a fuel-vapor separator with a return line back to the gas tank, and of course there is a metal vapor line from the filler hole that dumps down to the frame rail. But what are these 5 lines?

[Claudia]

Here are some additional pictures (from a Cuda) if needed.

[floorit426]

hmm, I'm not familiar with this set up. I've got nothing like it on my '70. I know some engines have a fuel-vapor separator with a return line back to the gas tank, and of course there is a metal vapor line from the filler hole that dumps down to the frame rail. But what are these 5 lines?

It's called an ECS system, standard on all California-sold cars, in 1970. In '71, it was standard on all cars, I think. I believe the fender tag code, is N95.

[Mopar5]

Thanks again 

[Mopar5]

 Installed

[floorit426]

 
Looks good

[Mopar5]

Thanks one more little part of the puzzle done.