Main Menu

8 3/4 casting numbers

Started by Burdar, September 30, 2018, 02:42:10 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Burdar

I bought a 741 case center section yesterday. The casting numbers are 337. When was it cast?

Thinking about having this powder coated so it stays looking nice. Thoughts?

ratroaster


Burdar

That was my first thought until I read an old Moparts post by "6bblgt" where he said 288 = Tuesday, 10/15 ('68) :notsure:


ratroaster

I was going by what my Dave Wise reference material says.  Could it be wrong? Sure it could....I don't understand the year code in that theory though.

71-440

Here's an interesting read on rears. Found this awhile ago.

http://www.mopar1.us/875.html

Joe

6bblgt

does it still have gears in it?  what are the dates on the gears?

Burdar

#6
It had 3.91's in it and a junk cone style sure grip so it's been apart before.

Here's a good article on the different cases and their bearing sizes.  This is why I'm not afraid to use the 741 in my application.  Dr Diff thinks it's highly underrated.
http://www.moparts.org/Tech/Archive/axle/1.html

When disassembling the unit, I found that it has a 10 spline pinion.  The only replacement gears for the 741 have 29 spline pinions.  I'll have to find a replacement yoke.  Does anyone have a 29 spline yoke that takes the small 7260 U-joint sitting around?


RUNCHARGER

Someone will, I used to have tons of those.
Sheldon

Gary

I have a couple of them, and I think I'm only a Sunday afternoon drive away.

Burdar

Thanks Gary.  I'm asking around to some local guys.  If I can't come up with anything I'll let you know.  :bigthumb: