904 TRANSMISSION OIL FLOW DIRECTION

[temsinc]

I have a 70 Barracuda w/ 318, 904 AT that I plan on installing an additional trans cooler over and above the radiator cooler. Can someone tell me the direction the trans oil flows out from trans to rad and returns etc?

Secondly, I am installing a new 4 row aluminum rad with dual electric fans with the transmission coolant ports. Do y'all recommend that I keep using the rad and add the aux cooler or bypass and use aux cooler mounted in front of radiator? Thank you in advance.


Darcy 

[Ric]

fluid comes out of the front line and returns to the rear line...

[temsinc]

Thanks Ric! 

[Chryco Psycho]

Welcome to the site 
I have found that running a clutch fan with a shroud is far more effcient for cooling than electric fans if you have the option to do that .

[temsinc]

I tried to add a re-pop shroud and the fitment sucked  . I had a new core put in the OEM rad and the car still runs 185-200 idling in the heat. I have the new radiator and added a trans cooler as well today. Just need to wire it up tomorrow, top off the fluids and fire it up and check for leaks....

Thanks again for the guidance, your help is appreciated. 

Darcy









...