Air Cleaners

[1 Wild R/T]

It has a drop base on it but needs a spacer to lift it up because of carb bowl interference. Here are pics of it. The adjustment screw sits above the carb flange. I think even if it did sit down on it the throttle mechanism would hit or the electric choke. Not sure what base will work. I would like to put a spacer on because of the starting issue (assuming it is vapor lock from fuel heating up).

You see those two raised areas that are over the valve covers?  They are for clearance for the float bowls....  Turn your air filter 90 degrees & remove the spacer... Then get a taller element....