Any tips on sealing Valve Covers on a small block?

[autoxcuda]

Thanks for all the responses guys.

Just to respond to a few points.

The valve covers are notched to clear the intake and I conformed they are not touching it.

I am using the FelPro gaskets that are basically cork impregnated with rubber and have cinched everything down a few times.

It sounds like I need to grab sum of the Right Stuff sealant and see if that helps, if not maybe try some different gaskets.

Jason

This gasket has lasted me 20+ years w/o leaks

https://www.summitracing.com/parts/dcc-p5249581ab?seid=srese1&gclid=Cj0KCQjw4s7qBRCzARIsAImcAxZ6lVEA4I-kwopJzMypzFKmYF8PTEz5KGXzoEkoQHiVbH6Wbv0ebgsaAhYNEALw_wcB