BBM 'B' Block - which solid roller lifters question again

[bbs]

Yes I searched, and a few old threads showed up.

Any brand I'm missing?

What I'm looking for is:
- Solid roller
- .820 roller (not .750)
- Bushed bearings (not needle)
- Oil-through to pushrods
- Standard height bore compatible

What meets the need:
https://borowskirace.com/products/big-block-chrysler-pro-plus-2000-series-904-on-center-mechanical-roller-lifter?variant=1300705760 - Bronze bushing $1,224
https://www.compcams.com/sportsman-solid-roller-lifter-set-w-bushing-for-chrysler-383-440-426-hemi.html  - Bronze bushing $1,195
https://www.lunatipower.com/sportsman-solid-roller-lifter-set-w-bushing-for-chrysler-383-440-426-hemi.html - Comp cams $1,195
https://www.hughesengines.com/Index/products.php?level0=RC0gQmlnIEJsb2NrIChMb3cgRGVjayk=&level1=TGlmdGVycw==&page=1&partid=31343 BAM 2016-16 $936


What doesn't:
https://www.howardscams.com/mechanical-roller-sportmax-vertical-bar-lifters-chrysler-383-440-392-426-hemi-howards-cams-91727-2 - .750 roller
https://crower.com/enduramax-roller-lifters-chrysler-440-mopar-performance-or-mega-block-left-intake-offset-903-od.html - Tall bores only
https://www.trickflow.com/parts/tfs-21400011 - Hydraulic rollers only
https://claysmithcams.com/chrysler-big-block-903-fits-mopar-b-retro-fit-street-performance-hydraulic-roller-lifters/ - Hyd only, .700 roller
https://johnsonlifters.com/Products/Hydraulic-Roller-Lifters/ST2312BBR -  .750 roller, but is short travel
http://schneidercams.com/SOLIDROLLERlifter5400-2.aspx - .750 rollers
https://www.compcams.com/endure-x-solid-roller-lifters-for-chrysler-v8-383-440-426-hemi-904-dia-centered-140-deeper-seat-set-of-16.html - Needle bearings only
http://www.pbm-erson.com/Catalog/Erson/Lifters/Solid-Mechanical%20Roller_EL/PBMRL968 (Morel) - .750 roller