Main Menu

Bolts dash frame to cowl

Started by Mopar5, August 04, 2020, 06:08:02 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Mopar5

I put in my cowl a few years ago and now I have gotten around to the dash frame so I went to check the fit of the new cowl to frame the fit seems to be spot on with the new cowl.My questions are I bought the bolt kit from classic industries they supply 6 bolts and 6 U nuts I only see 4 places for bolts from frame to cowl.





Mopar5


1 Wild R/T

There are four bolts at the edges of the defroster ducts... There are two bigger bolts in the kick panel area, they are 1/4-20, there are also two. studs that support the steering column which also go through the dash frame, those are also 1/4-20...

So basically you got 2 extra bolts & clips..


Mopar5

Quote from: 1 Wild R/T on August 04, 2020, 08:21:41 PM
There are four bolts at the edges of the defroster ducts... There are two bigger bolts in the kick panel area, they are 1/4-20, there are also two. studs that support the steering column which also go through the dash frame, those are also 1/4-20...

So basically you got 2 extra bolts & clips..
Thank you that is what I thought but I wanted to be sure.