Ever see one these shifters before?

[dave73]

First time I've seen one of these. Was this made for specifically for mopars or a custom one off?

https://www.ebay.com/itm/VINTAGE-ALUMINUM-PISTOL-GRIP-HURST-SHIFTER-HANDLE-MOPAR-CUDA-CHALLENGER-HEMI/311881324940?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Deca562f0af604158b8f6f4a44f08682d%26pid%3D100675%26rk%3D2%26rkt%3D15%26sd%3D372656721804%26itm%3D311881324940&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3A178fe382-9385-11e9-b2ec-74dbd1800e79%7Cparentrq%3A760ac08916b0a8604eb57f94ffc5ea18%7Ciid%3A1

[anlauto]

I don't know the history, but it's pretty cool looking.

[Brads70]

Good God, $450 for a chunk of  1/2" aluminum plate!    I need to get a CNC mill! 

[dave73]

Good God, $450 for a chunk of  1/2" aluminum plate!    I need to get a CNC mill! 

Get one and make me a shifter! 

[Chryco Psycho]

Pretty similar to the handles for the universal cable type shifters

[Jay Bee]

Good God, $450 for a chunk of  1/2" aluminum plate!

I checked this on ebay.ca. It came up as $594.65 CAD

[gzig5]

Good God, $450 for a chunk of  1/2" aluminum plate!    I need to get a CNC mill! 

Bah.  Bandsaw and a Bridgeport and you'd be done in 15 minutes.  Look at the surface finish on that thing!

I need a shifter handle for my 4 speed swap and plan to hack one out of steel or aluminum plate to keep the initial cost down. 

[HP2]

Asking and getting are two very different things.

[B5fourspeed]

What would the person want for it if it was in perfect condition?

[70chall440]

Would look very cool in a race car or maybe a restomod, but $450 is WAY over priced. You could make one yourself with a cutoff wheel and a grinder if you had a chunk of aluminum plate; if you had a CNC you could crank them out.