Main Menu

fuel pump pushrod

Started by JS29, June 02, 2022, 02:52:05 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

JS29

The push rod for my fuel pump on my 383 dose not want to come out, so I can check it for ware.  What is the trick to get it out I pulled the threaded plug out, put a magnet on it and it won't come out.  :dunno:

Bullitt-

According to these guys needle nose vice-grips seem to do the trick,,
https://board.moparts.org/ubbthreads/ubbthreads.php/topics/660058/1.html

Seems many replacement pump rods are crap... Someone recommended Hughes
https://www.hughesengines.com/Index/products.php?browse=search&search=fuel+pump+push+rod&partid=10201

.                                               [glow=black,42,300]Doin It Southern Syle[/glow]       

anlauto

Back in the late 90's I had a 440 Superbird that used to eat those push rods...The cam would damage the end of them, they were a bitch to get out...everybody blamed it on poor quality push rods and I went though two or three before I had to swap out the cam...Once the cam swap, I never had an issue again....
I used the needle nose method, but usually damaged to rod doing so. :dunno:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


jimynick

If you exhaust all the polite methods and if you have access to a stick welder, you can weld the stick on to the end of the rod and pull, as you will, on it. Best saved as a last ditch defence though.  :cheers:
In the immortal words of Jimmy Scott- "pace yourself!"