Main Menu

Fuel Pump Pushrod

Started by Mopar5, Today at 05:26:12 PM

Previous topic Next topic

0 Members and 7 Guests are viewing this topic.

Print
Go Down Pages1
User actions

Mopar5

Today at 05:26:12 PM
Does anyone have experience with the bronze tip fuel pump pushrod? My 383 has an iscky roller cam in it now . I have been hearing a lot of negative things about the pump push rods  regarding fast wearing in only a few hundred miles does any one has some positive news about them to share or a better alternative part?

Brads70

#1
Today at 06:50:17 PM
I'm using a hyd roller in my engine also. I went with an electric pump to avoid that issue. My engine is 12 years old now and I have changed the distributor gear once a few years ago and it didn't have much wear on it. It didn't " need" to be changed but I had a brand new one so....

Mopar5

#2
Today at 08:11:10 PM
Quote from: Brads70 on Today at 06:50:17 PMI'm using a hyd roller in my engine also. I went with an electric pump to avoid that issue. My engine is 12 years old now and I have changed the distributor gear once a few years ago and it didn't have much wear on it. It didn't " need" to be changed but I had a brand new one so....
Every little thing has gotten so complicated now.The stock pump pushrods were once fine now we need brass and composite Ugh.
Print
Go Up Pages1
User actions

Similar Topics