Got a factory 26" radiator but no shroud mounting holes?

[BigmanjbMOPAR]

Picked up an OER shroud for a 26" radiator but it doesn't fit bolt holes are a little past the factory.....what would be locations the factory holes seemed to be plugged with something like they were never used? Not sure this is the correct radiator it has the trans cooler at the bottom and this is a 4 speed car. Thoughts?

[anlauto]

What's the part number on top of the rad ? Likely not the correct rad.

[BigmanjbMOPAR]

So I figured out its a 70 C  body radiator and I guess is supped to have studs for the shroud to mount ? Guess I'll get a new one this one looks good but it came with the car and until I pressure test it can't be sure its good or not would just prefer a 2 row aluminum. 2998965 is the part #

https://www.ebay.com/itm/1970-Factory-MOPAR-Radiator-C-Body-2998965-Dodge-Chrysler-Plymouth-/362795436285?_trksid=p2349526.m4383.l4275.c4#viTabs_0

[anlauto]

Not sure what you paid for the OER fan shroud, but the correct one for a 70-71 E-Body 26" rad is still available from Chrysler for under $100 bucks 

[BigmanjbMOPAR]

Do you have a link? I paid 110 for this one.