Heat shield

[fireguyfire]

I've switched back to factory exhaust manifolds on my 70 383 engine.
IIRC there are either one or two spark plug heat shields on the engine.
Can someone post up a photo of this/these so I know what I'm looking for and I can track them down?

[Cuda Cody]

There's a few spark plug shields and also exhaust shields. I'll look for a photo of where they all go when I get back to my computer.

[fireguyfire]

Thanks Cody!

[anlauto]

In 1970 there's only two that I'm aware of. The one mounted on the passenger side to protect #6 & #8 plug. https://www.megapartsusa.com/proddetail.asp?prod=101%2DPWS02
and the one on the drivers side to protect #7 plug
https://www.megapartsusa.com/proddetail.asp?prod=101%2DPWS01

[Chryco Psycho]

Roseville will have the shields & they come with instructions for placement

[Cuda Cody]

These are the spark plug looms to keep the heat from the exhaust manifolds off the wires.  There's also the heat shield that goes on the exhaust too.

[fireguyfire]

I've got the loom set shown; I'm assuming the heat shields are in addition to the loom set?