Main Menu

Need Z bar pics installed to frame and trans

Started by BigmanjbMOPAR, February 08, 2021, 07:23:06 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

BigmanjbMOPAR

I'm trying to confirm we have it set up right just got the rebuild kit in. Just need to see some pics the service manual is ok. Also the clip that goes on the bar on the frame side is there for? Looks like it just holds the rubber seal in place?
70 Cuda Project Purple Book

Chryco Psycho

Sorry I don't have a good picture for you but  the frame ball & nylon bushing should slide into the Z bar first , there is a outer groove in the bushings so the ends of the clip should locate in the groove in the bushings this locates the Z bar relative to the frame to keep it inline with the pedal , then install the assy onto the ball on the belhousing & slide the outer ball into the bracket welded to the frame rail  & tighten the outer ball up .