Main Menu

Oval air cleaner on 440 with factory air?

Started by 70RTSE383, October 29, 2018, 09:54:05 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

70RTSE383

I'm working on a 440 for my Challenger awith factory a/c. I will likely use an intake taller than original (Edel RPM) and would really like to get s repop oval air cleaner on it. I dont think they were used together probably do to clearance problems between the two.Does anyone know if it can be done or is it just not possible?
70' Challenger R/T SE in progress
66' Mustang fastback GT350 clone
Factory Five Cobra
70' Kawasaki H1
70' Honda CT 70

Chryco Psycho

Just not sure , the V2 compressor is large & tall but sits far forward , my guess is it will interfere but I cannot say 100% either way , I have used smaller Sanden compressors sitting low with 6 packs & factory air cleaners tho

1 Wild R/T

Requires a notch in the air cleaner....  Not to mention the air cleaner is likely to hit the hood....  I run an RPM on my 383 with the stock dual snorkel & I need to shift the snorkels slightly to clear the hood bracing.... The oval is taller....And longer, but not as wide.... And your 440 is 3/4" taller...


70RTSE383

Thanks for sharing your information with me. I Just really would like the big oval air cleaner. Loved them since I built models as a kid.
70' Challenger R/T SE in progress
66' Mustang fastback GT350 clone
Factory Five Cobra
70' Kawasaki H1
70' Honda CT 70

1 Wild R/T