Trying to identify a couple of transmissions

[Bpret]

I have two older b body transmissions is there any way to determine what they came out of?

[6bblgt]

they have no VIN pad - so, they are pre-'68 model year
they are not ball & trunnion - so, they are newer than '64 model year

are they both 23-spline? If so .....
1965 - 1967 B & C-bodies with 361 or 383

GG's "white book" lists the  "392" unit as 1967 model year 383

[Bpret]

Thanks for the info both are 23 spline

[Chryco Psycho]

Do they both have the smaller 4.35 front brg retainer diameter if so they are both light duty

[Bpret]

Yes both have the same size bearing retainers about  4 1/4. They appear to be in good shape. Both stored indoor for the past 30 years or so. I was looking for a 23 spline 25 tooth input shaft for another transmission I have and ended up buying these just because I was there. So if anyone has a 23 spline 25 tooth input shaft laying around I'm a buyer.

[Bpret]

After looking through some old stuff I found a shifter that bolts onto this pad. And there is a plate with a stamp bolted to cover is this a date? Trying to get an idea what this would fit. The shifter did not come with the transmission but bolted onto shift pad. The shifter looks like a 3spd but has the extra lever for a 4spd. Any idea what cars came with this style shifter.

[6bblgt]

9 2 66 would be accurate for an early '67 transmission

the shifter looks like an Inland shifter, which would be correct for '67, what does the rest of the lever look like?

I believe this is an A-body unit 

[Bpret]

The handle that is on it now is from a 3spd cuda but the shifter mechanism looks just like your picture. I will probably sell or trade this whole set up. I need an input shaft for a abody transmission 23 spline 25 teeth on gear. Or trade this trans for a abody transmission. Know anybody who has one?