Post a picture of your Mopar Engine

[Brads70]

Almost 3 weeks gone by....

Did we run out of engines?

Nothing "special" just a 451"

[timdp]

It looks like the fan is on backwards?   

Yes it was. Fixed now...

[SCHU]

my 70 cuda 383 appears basically stock with shaker hood installed,  which covers MP 6bbl set up.
Below 440 crank machined to fit, increases displacement to 431 ci, with 390 HP & 490 TQ.

[IRON MAN]

Always liked the it gets driven look.

[THE ZUKE]

My 440 CI / 4 barrels with a new air filter 3"  (Very very fair compared to the underside of the hood (less than 1/2 inch). 

Much more efficient and pretty than the old one in 2 inches

[340challconvert]

Original small block 340 in my A66 vert just out of 35 year storage

[js27]

440 + some
JS27

[cordodge]

572 in the challenger

[nsmall]

@THE ZUKE

I have a tight clearance to and unfortunately I ripped the engine mount  and damaged my hood so consider getting something to hold that engine down.

[THE ZUKE]

@THE ZUKE

I have a tight clearance to and unfortunately I ripped the engine mount  and damaged my hood so consider getting something to hold that engine down.

@nsmall  Before installing the new air filter with its very low support. I took all the ribs with modeling clay. After installing the new filter, I did the same thing again. The only place a fair bit (1/2 ") is the middle of the air filter.It holds with a screwed part on the threaded rod which is screwed on the carburetor HOLLEY

[nsmall]

My sweet 340...

[dave73]

512 in my 73

[RT999]

stone stock

[392 Cuda]

Following up on my last post... got it in there!

[challengermaniac]

1970 Challenger T/A 340/6 Pac