Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) => Topic started by: B54SPEED on November 11, 2017, 10:31:19 PM

Title: FACTORY HOLES IN TRUNK ?
Post by: B54SPEED on November 11, 2017, 10:31:19 PM
 :thinking: :thinking: Do these holes located behind the filler neck serve any purpose and were they put in by the factory? :thinking: :thinking:
Title: Re: FACTORY HOLES IN TRUNK ?
Post by: Jim AAR on November 11, 2017, 10:38:17 PM
That's for the Muffler mounting Plate.
Title: Re: FACTORY HOLES IN TRUNK ?
Post by: B54SPEED on November 11, 2017, 10:50:10 PM
So a T/A or a AAR would have no use for them correct?
Title: Re: FACTORY HOLES IN TRUNK ?
Post by: 1 Wild R/T on November 11, 2017, 10:52:37 PM
Quote from: B54SPEED on November 11, 2017, 10:50:10 PM
So a T/A or a AAR would have no use for them correct?

Correct & there shouldn't be any holes..
Title: Re: FACTORY HOLES IN TRUNK ?
Post by: Jim AAR on November 11, 2017, 10:53:06 PM
Correct, they should not be there on a TA or AAR. My AAR does not have them and its the original trunk floor.
Title: Re: FACTORY HOLES IN TRUNK ?
Post by: Cuda Cody on November 12, 2017, 03:25:28 AM
 :iagree:
Text only | Text with Images