as always to busy to work on my cars but as always knowledge from others saves time . few pics of what I've got going on, I'll start some posts of the resto's if i can find time,
so my question is the challenger has the reverse light wire feeding threw the fire wall ,which in many diagrams it calls for the tach wire, im assuming it goes in the empty bottom spayed in the bulkhead connector for the engine harness ? of course that is the only harness i replaced and i guess i might have overlooked that because i did have the single wire through fire wall ? like i said others knowledge prevents smoke lol
yes i looked at those diagrams ,,, the shows tach through fire wall the other has it with bulkhead connection, car is all original with 16k miles unfortunately orig owner threw a hemi in it and went drag racing so motor harness was a little chewed up , i believe the new one was from year one, like i said bottom left spayed connector slot is empty and from the diagrams i believe that's the tach
:welcome: Sorry not much help with electrical but just wanted to say welcome to the site! Nice rides you have there! :bradsthumb:
Your tach wire should be in the main engine harness #20 at the bulkhead :alan2cents:
ya alan that's what i figured , not sure why new harness didn't have it, hate to buy a new harness (again), maybe i'll try sneak the wire up there it's def not a 100 point car
:welcome:
Awesome cars!
Welcome to the site from Panama :wave:
Looks like a couple of nice Ebodies !!
:welcome: from Riverside, California
:welcome:From :australia:
:welcome: :handshake:
Welcome from B.C. Canada.
Awesome rides bro! Thanks for sharing.
:welcome: to the site. :cheers:
Welcome to the site from Ontario, :canada: and good luck with the finishing of those fine rides you've got! :wave: