E-Bodies.org Cuda Challenger Forum

Technical Shop => Tools and Equipment => Topic started by: soundcontrol on March 19, 2017, 02:42:23 PM

Title: Say hello to my little friend
Post by: soundcontrol on March 19, 2017, 02:42:23 PM
Not a machine gun.... but a mini battery powered grinder.
Just bought it today, in a kit with a small drill, 2 batteries and a charger. Very nice tool, not for heavy stuff but for all the small stuff.
I got a small air driven grinder also, but then I have to go get the big hoses, turn on the noisy compressor etc...
This one is perfect for the grinding work when repairing panels etc. and the battery lasted all night! I did 2 repairs.
Maybe thats a good thing....I'm transforming from a grinder to a welder   :)

It doesn't make as much noise as a normal grinder, but it still spins 19 200 rpms, and I took the protective shield off, and I noticed that I was less careful with it, because it didn't sound "dangerous" and I made a cut in my expensive TIG gloves, ooops...
Title: Re: Say hello to my little friend
Post by: Cuda Cody on March 19, 2017, 03:19:50 PM
You can never have enough cool tools.  Those look like they will be handy to have around.   :twothumbsup: