Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Electrical & Audio => Topic started by: fireguyfire on March 27, 2020, 12:41:27 PM

Title: 73 fender turn signals
Post by: fireguyfire on March 27, 2020, 12:41:27 PM
Just getting around to removing the fender mounted turn signal lights on my 73 challenger; I'm not sure the the rubber gasket on top is attached to the pigtail below and they pull out as a unit, or do they separate and remove?
Trying not to wreck them removing them so I thought I'd post it here before I get too forceful with the removal process.
Title: Re: 73 fender turn signals
Post by: anlauto on March 27, 2020, 12:44:38 PM
Pretty certain they pull up from the top, the base rubber is part of the wire connection. Inside the fender, unplug it and pull from the top. :alan2cents:
Title: Re: 73 fender turn signals
Post by: Rich G. on March 27, 2020, 12:48:24 PM
I agree. Just put them in the 73 cuda I'm doing
Title: Re: 73 fender turn signals
Post by: fireguyfire on March 27, 2020, 12:51:02 PM
[emoji106]thanks gents
Title: Re: 73 fender turn signals
Post by: JS29 on March 27, 2020, 01:41:15 PM
 :iagree:
Title: Re: 73 fender turn signals
Post by: 71383bee on March 27, 2020, 04:20:36 PM
Yep.  pull from the top.  Fishing the new wire in can be a pit of a pain.  i recall just taping a piece of wire to mine like a fish tape.  it made install a little easier. 
Title: Re: 73 fender turn signals
Post by: JS29 on March 28, 2020, 05:55:52 AM
 :iagree:  Fishing a wire through is always a good idea.    :bigthumb:
Text only | Text with Images