Anyone here have them in their car? I haven`t had a chance to really look at them yet, how easy/hard is it to adapt them to the factory seat tracks or did you use the Neon tracks and adapt them? I have a grinder and a welder and also work in a sheet metal shop so fabrication is no problem just wondering if anyone has done it already?
Staying tuned in for the answers on this one :thinking:
Are you talking about using the new ones or the sweet 90s neon?
several have done it and if I remember correctly they are a bolt onto the oe tracks. Check on cc.com. some threads there with pictures
Quote from: Shoooter on February 20, 2020, 12:35:50 PM
Are you talking about using the new ones or the sweet 90s neon?
2003-2005
Takes some digging but 70chall440 has a post on c-c.com that shows how he mounted the seats -
http://www.cuda-challenger.com/cc/index.php?topic=108127.1095
Those seats look nice. Would they fold forward enough to allow someone to get in the back?
They go from almost straight upright to about 60 degrees recline, I obviously don`t need that much recline angle so when I take them apart I`ll look at modifying the mechanism so hopefully they will go further forward.
I just moved the car into my shop to start working on it again, I am going to work on getting the seat brackets modified to fit and tear them apart for reupholstery and I`ll look at the mechanism then. I`ll update the thread as soon as I figure it out.
Have a pair. Not disassembled. Interested they can tilt further forward.
----o00o--'(_)'--o00o----