Hey guys,
I'm installing my headlights and buckets and the Body Service Manual doesn't have a good picture of where the hardware goes. Does anyone have a pic of where the hardware and springs go to install the buckets? Thanks
Here are some shots of my 1970 Challenger. Hope they help. :cheers:
to position the headlights properly there are 4 different buckets, originally color coded - these are a '72 GTX
don't know if they were all the same - there should be stamped info on them as well
I believe its:
tan = RH
blue (green?) = RH hi beam
orange = LH hi beam
red = LH
Perfect thanks guys.
Quote from: 6bblgt on July 31, 2018, 09:02:19 PM
to position the headlights properly there are 4 different buckets, originally color coded - these are a '72 GTX
don't know if they were all the same - there should be stamped info on them as well
I believe its:
tan = RH
blue (green?) = RH hi beam
orange = LH hi beam
red = LH
Is that same color coding used for all 4 headlight models?
I was just noticing that they were color coded on my 70 Challenger, but I only have 3 original buckets, so I'd like to know what color the missing bucket should be identified with.