Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: Jamie69 on July 17, 2017, 03:49:05 PM

Title: 1970 D O D G E hood letters on Challenger. What size speed nuts do they take?
Post by: Jamie69 on July 17, 2017, 03:49:05 PM
What size speed nuts do the letters D O D G E on a 1970 Challenger use?
Title: Re: 1970 D O D G E hood letters on Challenger. What size speed nuts do they take?
Post by: Cuda Cody on July 17, 2017, 04:32:31 PM
@Jamie69 (https://forum.e-bodies.org/mlist/jamie69_732)  Welcome to the board.   :welcome:  I thought they were push pins, but learned they were speed nuts.  This is a thread that has some photos of the correct Speed Nuts...

https://forum.e-bodies.org/body-shop/5/dodge-hood-letters-installation/779/
Title: Re: 1970 D O D G E hood letters on Challenger. What size speed nuts do they take?
Post by: 1 Wild R/T on July 17, 2017, 05:52:32 PM
The hex is 5/16, the stud is 1/8" & the flange is 17/64....

This is a good match....   Box of 100 is $10.45......    https://www.mcmaster.com/#90533a132/=18jkpf4
Title: Re: 1970 D O D G E hood letters on Challenger. What size speed nuts do they take?
Post by: Chryco Psycho on July 17, 2017, 07:42:56 PM
Welcome Jamie
I knew they were very small but did not have the specs . Thanks Wild !
Text only | Text with Images