I've been looking around for the boots on the ball joints for the UCA's. It looks like I may have to buy the entire ball joint to replace the boot. These ball joints are brand new but it seems they have been sitting on the shelf too long and have now cracked and I just want to replace the boots.
I have some energy suspension boots but they don't look tall enough to do the job.
Ideas?
Most auto parts stores carry replacement screw in ball joint boots.
https://www.speedwaymotors.com/Replacement-Screw-In-Ball-Joint-Dust-Boot-Mustang-II-K772-Application,100099.html?sku=91034006&utm_medium=CSEGoogle&utm_source=CSE&utm_campaign=CSEGOOGLE&gclid=CjwKCAjwma3ZBRBwEiwA-CsblFu1aqTey5SmTcYDQIFOv3zn4vOkaLXU6OFjg5NuvOB-4uoLzfclJhoCvN4QAvD_BwE
Might just try taking your ball joint down and seeing if they have some in stock that fit? :notsure:
Quote from: Cuda Cody on June 21, 2018, 03:58:12 PM
Most auto parts stores carry replacement screw in ball joint boots.
https://www.speedwaymotors.com/Replacement-Screw-In-Ball-Joint-Dust-Boot-Mustang-II-K772-Application,100099.html?sku=91034006&utm_medium=CSEGoogle&utm_source=CSE&utm_campaign=CSEGOOGLE&gclid=CjwKCAjwma3ZBRBwEiwA-CsblFu1aqTey5SmTcYDQIFOv3zn4vOkaLXU6OFjg5NuvOB-4uoLzfclJhoCvN4QAvD_BwE
Might just try taking your ball joint down and seeing if they have some in stock that fit? :notsure:
I've used a bunch of those.....Cracks me up, they call them Mustang II instead of what they are... Mopar...... Kinda like calling Mustang II what it really is Pinto.... :rofl:
Thanks Cody but all the parts shops around me only carry the energy suspension boots and they are not going to work.
I can either buy the K772 ball joint itself and have some spares or just order from your URL.
Guess which route I'm going.
:yes:
looks like our buddy Dave may have ya covered ...
Don't know why it says B-body...everything else shows to fit E & B
http://www.rosevillemoparts.com/product_info.php/p/front-end-boot-seal-package-68-72-b-body/products_id/7877