Looked online to see if a borgeson box will fit with a 6.1 and tti headers. Found nothing.
Emailed the m as well. No response.
Anyone know?
Not sure but perhaps Peter @ Bergman Autocraft will know.
His email is:
peter@autosportdesigns.com
Tell him Alan Crouch sent you ;)
Quote from: 1973Barracuda on August 17, 2018, 07:35:35 PM
Looked online to see if a borgeson box will fit with a 6.1 and tti headers. Found nothing.
Emailed the m as well. No response.
Anyone know?
TTI site says their headers clearn the borgeson box for a gen III.
Thanks!
Seems I wasn't smart enough to go to the tti site.......
Note that TTI has borgeson specific hemi swap headers. You can use the standard swap headers...but get the hammer out. DAMHIK
Well, no Borgeson for me then. I was doing it because with shipping, it would have been about the same price as FF. FROM summit with a coupon.
Quote from: 1973Barracuda on August 18, 2018, 09:06:41 AM
Well, no Borgeson for me then. I was doing it because with shipping, it would have been about the same price as FF. FROM summit with a coupon.
Have you bought the headers already?
Sent from my iPhone using Tapatalk
Yep. TTIs.
Will verify the part number, but I am certain I did not specify if I was using a Bordeson box.
Quote from: 1973Barracuda on August 19, 2018, 04:17:01 AM
Yep. TTIs.
Will verify the part number, but I am certain I did not specify if I was using a Bordeson box.
These are the ones that fit - http://www.ttiexhaust.com/MoparClassics-Headers/61WP-134/TTi61WP.htm
Yep, I have the headers that won't work with the Borgeson. Firm Feel it is.
Quote from: 1973Barracuda on August 19, 2018, 04:40:20 PM
Yep, I have the headers that won't work with the Borgeson. Firm Feel it is.
Get the Stage III. I have it on my Charger and it works great!
Read nothing but good stuff about the stage three. For the money, I figured I would go with a Borgeson for the fewer pounds. With shipping, it will be about the same price I think.