Print Page - '70 HP 440

Title: '70 HP 440
Post by: Choppintime on March 14, 2018, 12:57:26 PM

Need to go look and was sent one picture :

I'm told it's out of a 70 V code Challenger. Guy who has it junked the car back in 80's because it was so rotted. Pulled the 440. Been sitting a long time and currently has a 4bbl aftermarket intake and carb in it.

Waiting for a pic of the vin #

(https://uploads.tapatalk-cdn.com/20180314/5aba654585bf11f9cc3bc1beb7d2a34d.jpg)

Sent from my iPhone using Tapatalk

Title: Re: '70 HP 440
Post by: Cuda Cody on March 14, 2018, 01:11:57 PM

Any idea of the bore size?

Title: Re: '70 HP 440
Post by: Choppintime on March 14, 2018, 01:44:08 PM

No - I'll find out

Sent from my iPhone using Tapatalk

Title: Re: '70 HP 440
Post by: HP_Cuda on March 14, 2018, 03:15:44 PM

Hopefully it's not past .30 over, based on the raised portion the crank is not undersized.

E-Bodies.org Cuda Challenger Forum

Classifieds => What's It Worth? => Topic started by: Choppintime on March 14, 2018, 12:57:26 PM