Print Page - T/A Hood Pin Rivets, who makes them?

Title: T/A Hood Pin Rivets, who makes them?
Post by: RSI700VIPER on October 13, 2019, 06:58:08 AM

My newly acquired T/A was previously redone with the wrong hood pin kit. Everything is relatively new, but I want to replace the screws holding the bezels on with the correct rivets. Does anyone sell just the rivets or do I have to buy a whole kit?

Title: Re: T/A Hood Pin Rivets, who makes them?
Post by: Floyd on October 13, 2019, 07:06:23 AM

I think I got mine from Frank Badalson. You might also check with Dales Cuda Shop.

Title: Re: T/A Hood Pin Rivets, who makes them?
Post by: Ricomondo on October 14, 2019, 04:18:34 PM

Same situation here. Just bought the car and wrong stuff. Ordered the entire kit from DCS (Dales Cuda Shop) Not sure if they sell just the rivets? They don't have a landline that I'm aware of? You'll have to email.

E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) => Topic started by: RSI700VIPER on October 13, 2019, 06:58:08 AM