Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Interior => Topic started by: Rutro on October 26, 2019, 06:44:38 PM

Title: Inside door handle pull and door latch rod connection help!!!
Post by: Rutro on October 26, 2019, 06:44:38 PM
OK, I didn't pay enough attention when I took these parts off the door.
Please see the pictures.
I removed the inner door handle mechanism and the rod going to the door latch.
The rod fits into the hole coming off the back. The is a groove at the bottom of the right angle. Is there a clip that goes on the groove?
I need to pay more attention...I know
Title: Re: Inside door handle pull and door latch rod connection help!!!
Post by: Cuda Cody on October 26, 2019, 07:00:01 PM
 :yes:  There's a clip.
Title: Re: Inside door handle pull and door latch rod connection help!!!
Post by: anlauto on October 26, 2019, 10:02:29 PM
Yup...Door handle rod clip ...slides over and retains the rod.
Title: Re: Inside door handle pull and door latch rod connection help!!!
Post by: Rutro on October 27, 2019, 04:35:43 AM
Cody, Alan
Thanks guys, the little stuff kills me
Text only | Text with Images