Print Page - Where do I fine original Diagram?

Title: Where do I fine original Diagram?
Post by: tparker on April 24, 2023, 03:40:36 PM

I found this diagram in the orange guide to fasteners, hardware, and general assembly book. That copy is faint in a couple areas and I can't trace some lines. It also appears to be a 1969 if other sections are correct since it seems to show an idler wheel that the 70's don't have. Does anyone know where I can find the source of this diagram, and for a 1970? I have the yellow reproduction 1970 service manual and I don't see that diagram in that book.

Thanks
Tom

Title: Re: Where do I fine original Diagram?
Post by: moparroy on April 24, 2023, 04:35:31 PM

1970 (and 71) service manuals are on this site under Resources. Not sure if that is in there but have a look

Title: Re: Where do I fine original Diagram?
Post by: tparker on April 24, 2023, 07:56:31 PM

@moparroy (https://forum.e-bodies.org/mlist/moparroy_8815) I have the 70 one and it isn't in there. From what I can tell they are for a pre 70 model, which used the idler arms. I could be (and probably am) wrong on that. I'll check out the 71 one.

Thanks

Title: Re: Where do I fine original Diagram?
Post by: Floyd on April 25, 2023, 07:11:42 AM

I have a collection of Engineering drawings photocopies for 71. Here's what I have for small block w/AC. The quality isn't great but most of its readable.

Title: Re: Where do I fine original Diagram?
Post by: tparker on April 25, 2023, 08:36:13 AM

Wow, those are so much better quality than what I have, even photocopied and photographed on a web site. I'll be using them. Thanks.

E-Bodies.org Cuda Challenger Forum

Technical Shop => Reference Material => Topic started by: tparker on April 24, 2023, 03:40:36 PM