E-Bodies.org Cuda Challenger Forum

Technical Shop => Electrical & Audio => Topic started by: Racer57 on February 15, 2018, 06:19:58 PM

Title: Whats these wires on starter relay for ?
Post by: Racer57 on February 15, 2018, 06:19:58 PM
Sorry for being so stupid about wiring. But it hates me as much as I hate it.

What is the green, yellow and brown wires for in this pic ?  The factory fusible link wire was disconnected after this pis was taken. Thanks.
Title: Re: Whats these wires on starter relay for ?
Post by: GoodysGotaCuda on February 15, 2018, 06:24:01 PM
Quote from: Racer57 on February 15, 2018, 06:19:58 PM
Sorry for being so stupid about wiring. But it hates me as much as I hate it.

What is the green, yellow and brown wires for in this pic ?  The factory fusible link wire was disconnected after this pis was taken. Thanks.

Brown = 12v to starter solenoid when the green has ground and the yellow has 12v
Yellow = 12v from the ignition switch in the "crank" position
Green = Neutral safety switch or clutch switch
Title: Re: Whats these wires on starter relay for ?
Post by: dodj on February 15, 2018, 06:25:11 PM
Yellow is start
Green is relay ground (NSS)
Brown is starter engagement
Title: Re: Whats these wires on starter relay for ?
Post by: 1 Wild R/T on February 15, 2018, 06:30:29 PM
Nothing to add, clearly it's been covered...
Title: Re: Whats these wires on starter relay for ?
Post by: Racer57 on February 16, 2018, 06:49:26 AM
Thanks !!