I found the reference material thread for placement, drilling etc of the Challenger right fender pentastar, but the repop I have has no fasteners. Just the two stems. Can't think of the name of those stamped out nuts, but does it take one of those or a push type metal clip?
I just pushed it on with a dab of silicone.
Should be friction fit w/o any fastener. The larger pin is a fastener in itself. That's how mine works.
Quote from: tman on April 12, 2023, 03:44:50 PM
Should be friction fit w/o any fastener. The larger pin is a fastener in itself. That's how mine works.
:iagree: :twothumbsup:
I call what you're describing, Palnuts.
I believe the clip your referring to is called a barrel clip. But like everyone else says they do is it's a press in fit. Use a little silicone if you like should work.
Looks to me that the retainer tabs on the one you have are broken off when removing it in the past .