Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Electrical & Audio => Topic started by: Daveh on January 28, 2019, 06:33:54 PM

Title: Starter Wiring Question
Post by: Daveh on January 28, 2019, 06:33:54 PM
Hey guys,

I've installer a mini starter and have a question on the starter wiring harness do I just slice the ground and hot in the picture below and attach them to the starter?  Thanks
Title: Re: Starter Wiring Question
Post by: Convertcuda on January 28, 2019, 06:35:40 PM
Yep, Thats works the best when you do.

Ken
Title: Re: Starter Wiring Question
Post by: Chryco Psycho on January 28, 2019, 06:36:46 PM
that is what I do , but the small wire is not ground , it is the wire to the solenoid so both are positive but the solenoid wire is switched
Title: Re: Starter Wiring Question
Post by: Daveh on January 28, 2019, 06:36:56 PM
Thanks Ken
Title: Re: Starter Wiring Question
Post by: Daveh on January 28, 2019, 06:37:45 PM
Got it on the solenoid. 
Title: Re: Starter Wiring Question
Post by: HP_Cuda on January 28, 2019, 06:47:22 PM

Something like this, yup I have a mini starter

Text only | Text with Images