Print Page - AAR/TA rear shackle bushings

Title: AAR/TA rear shackle bushings
Post by: 68bee on March 28, 2020, 10:10:10 AM

I am replacing the rear leaf spring shackle bushings in my AAR Cuda and need to order the bushings.
Rockauto lists moog k7308 for challenger and moog k 7309 for cuda.
Does anyone know which ones are correct?

Title: Re: AAR/TA rear shackle bushings
Post by: anlauto on March 28, 2020, 10:13:58 AM

K7308 are correct in my opinion. :alan2cents:

I believe K7309 are the small "A" Body ones.

Title: Re: AAR/TA rear shackle bushings
Post by: 68bee on March 28, 2020, 12:06:46 PM

Thank you.
I just checked a box of the moog 7309 that I had and they are the smaller a body bushings

Title: Re: AAR/TA rear shackle bushings
Post by: Blake@diyhemi.com on March 28, 2020, 01:25:30 PM

Along the same lines... rockauto does not list rear sway bar links for these cars. What is the correct moog part for the rear of an AAR/TA ?

I replaced my fronts with moog already, but want to do the rear as well

Sent from my iPhone using Tapatalk

Title: Re: AAR/TA rear shackle bushings
Post by: anlauto on March 28, 2020, 01:31:40 PM

Quote from: Blake@diyhemi.com on March 28, 2020, 01:25:30 PM
Along the same lines... rockauto does not list rear sway bar links for these cars. What is the correct moog part for the rear of an AAR/TA ?

I replaced my fronts with moog already, but want to do the rear as well

Sent from my iPhone using Tapatalk

I don't think Moog makes anything close for the rear sway bar, you'll have to go with the reproduction ones available from Roseville Moparts. Or if your rear link studs are still good, you can just replace the bushings from a Moog kit :dunno:

E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) => Topic started by: 68bee on March 28, 2020, 10:10:10 AM