E-Bodies.org Cuda Challenger Forum

Technical Shop => Electrical & Audio => Topic started by: Daveh on November 20, 2017, 08:33:54 PM

Title: 1971 Convertible Wiring Harness Identification With Pics
Post by: Daveh on November 20, 2017, 08:33:54 PM
Hey guys,

As a lot of you know I'm having some dash wiring questions.  I'm considering a new harness but they don't come with the Convertible harness.  Attached are some pics of the connector and where I think it connects to the fuse box.  I'm not certain.  It's not labeled on the fuse box that's why I'm thinking this is it. 

Is this the end of the convertible harness entering the fuse box.  If not how can I figure it out without removing all of the black wrap?  Thanks
Title: Re: 1971 Convertible Wiring Harness Identification With Pics
Post by: Jim AAR on November 20, 2017, 10:01:54 PM
Yes it is, that's the Safety Relay
Title: Re: 1971 Convertible Wiring Harness Identification With Pics
Post by: 1 Wild R/T on November 20, 2017, 10:52:18 PM
As Jim said, that is the harness, it should be a completely stand alone harness, it gets it's power off the red terminal on the back of the ammeter....
Title: Re: 1971 Convertible Wiring Harness Identification With Pics
Post by: Spikedog08 on November 21, 2017, 09:13:05 AM
That is helpful information!  I was going to just go and look but no need now!   :banana:
Title: Re: 1971 Convertible Wiring Harness Identification With Pics
Post by: 1 Wild R/T on November 21, 2017, 09:29:53 AM
BTW the circuit breaker is part of it too...
Title: Re: 1971 Convertible Wiring Harness Identification With Pics
Post by: Daveh on November 21, 2017, 09:43:06 AM
Awesome thanks guys.