Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: Mrbill426 on July 29, 2020, 09:53:04 AM

Title: Unknown gasket
Post by: Mrbill426 on July 29, 2020, 09:53:04 AM
I allowed my paint gaskets to  mix with my A/C &heater box gaskets so I don't know what kit this came out of but I have no current idea what this thick (about 3/8") foam gasket is for :huh:; anyone?   On that subject I was sort of surprised that the paint set did not include wiper pivot gaskets.  I can make them of course but I figured they would be there.

Thanks
Title: Re: Unknown gasket
Post by: Mrbill426 on July 29, 2020, 10:18:36 AM
@AARclone (https://forum.e-bodies.org/mlist/aarclone_6248)  My box has one large rectangular hole on the top passenger side that uses a rubber doughnut.



Quote from: AARclone on July 29, 2020, 10:10:40 AM
Does it go with the drivers side cowl vent?
Title: Re: Unknown gasket
Post by: anlauto on July 29, 2020, 11:38:19 AM
Optional non-AC heater box blower motor to firewall gasket :dunno:
Title: Re: Unknown gasket
Post by: Mrbill426 on July 29, 2020, 02:48:24 PM
Found it in my parts book; looks like it is for the fresh air duct on a Dart or Valiant; no Barracuda.  It's not listed in the kit contents so must have just slipped in.



Quote from: anlauto on July 29, 2020, 11:38:19 AM
Optional non-AC heater box blower motor to firewall gasket :dunno:
Text only | Text with Images