Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) => Topic started by: Douglas on December 17, 2021, 11:36:36 AM

Title: Hole remaining at bottom front of quarter window after door jam rubber installed
Post by: Douglas on December 17, 2021, 11:36:36 AM
Is there something missing where this hole is . When the quarter window is in full up position, door closed.
Title: Re: Hole remaining at bottom front of quarter window after door jam rubber installed
Post by: Cuda Cody on December 17, 2021, 12:05:54 PM
There's a lot of adjustments needed to get the windows to line up.  Both the quarter window and front window can be adjusted.  Tell us what you have done so far to get to this spot?  Were the windows just installed?  Was the car restored and what body work was done?
Title: Re: Hole remaining at bottom front of quarter window after door jam rubber installed
Post by: anlauto on December 17, 2021, 02:05:06 PM
What hole are you asking about ? you can bend the rubber piece in more if you want it closer to the glass...the rubber has metal inside to hold it's shape... :alan2cents:
Title: Re: Hole remaining at bottom front of quarter window after door jam rubber installed
Post by: anlauto on December 17, 2021, 02:06:14 PM
Welcome to the best E Body website in the WORLD :grouphug:
Text only | Text with Images