Mine appears to be plugged. Fluid comes out of hose, but neither squitter and I want to try to clear it. Can it be removed from hood without breaking it ? Its only 3 or 4 years old and the old one I didn't try to save and did break.
That last time I cleared mine I just used a needle.
Quote from: moreparts on June 01, 2023, 08:31:01 PM
That last time I cleared mine I just used a needle.
Did you remove it from the hood without breaking it ?
Torch tip cleaners are imperative to have around. Here's just one on Amazon. I think Harbor Freight has them too.
https://www.amazon.com/Valchoose-Premium-Cleaner-Carburetor-Cleaning/dp/B0BWS41GRM/ref=mp_s_a_1_8?keywords=torch+tip+cleaner&qid=1685718049&sr=8-8
Not sure what exactly you are referring to. But I removed mine when I painted the hood and I didn't break anything. I don't recall how I removed it, so it must have been pretty straight forward. I thought it was held in place with screws.
Quote from: Racer57 on June 02, 2023, 06:51:14 AM
Quote from: moreparts on June 01, 2023, 08:31:01 PM
That last time I cleared mine I just used a needle.
Did you remove it from the hood without breaking it ?
I did not remove mine. That torch tool looks good though. I'd use that if I had to do it again.
It just snaps in, you should be able to get in there from the back of the hood with a needlenose and squeeze the retainer ends together and remove it.