Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: headejm on March 15, 2020, 10:38:44 AM

Title: Anti-Rattle Alignment Clips
Post by: headejm on March 15, 2020, 10:38:44 AM
I'm thinking of installing the anti-rattle window alignment clips on my Challenger. It seems to be a mystery whether or not all E-bodies came from the factory with these clips installed. I've seen a lot of cars without them and wonder if they were removed at some time or just not installed at all.

Does anyone have any comments about these clips? Also, can someone show me exactly where they are installed?  :thankyou:

Credit: Thanks to DMT for the photo.
Title: Re: Anti-Rattle Alignment Clips
Post by: B5fourspeed on March 15, 2020, 11:05:35 AM
I think early cars did not get them.My Cuda is sept built and I would like to see where they go.I was just thinking that I might add them when I assemble my car.Good topic.
Title: Re: Anti-Rattle Alignment Clips
Post by: JS29 on March 15, 2020, 12:16:18 PM
 :popcorn:
Title: Re: Anti-Rattle Alignment Clips
Post by: Katfish on March 15, 2020, 12:40:48 PM
 :popcorn:

I haven't seen these either, my windows do rattle .......
Title: Re: Anti-Rattle Alignment Clips
Post by: dodj on March 15, 2020, 01:29:15 PM
My '73 had them. I have replacements, but never installed them. They install a little to the rear of where the roof and A pillar meet.
Title: Re: Anti-Rattle Alignment Clips
Post by: 76orangewagon on March 15, 2020, 01:55:30 PM
My 71 has them there was a wear mark on the inside of the stainless trim fro the original, here are a few photos to help you out.
Text only | Text with Images