Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

E-Bodies Cuda & Challenger (sponsor: ROSEVILLE MOPARTS) => Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) => Topic started by: Rich G. on December 18, 2017, 01:17:17 PM

Title: Convertible windshield trim.
Post by: Rich G. on December 18, 2017, 01:17:17 PM
When I took the stainless trim off the A pillars and top windshield frame is had some sort of black sticky stuff that seemed to hold it on rather then just snapping it on. What are you using when you put the trim back on?
Title: Re: Convertible windshield trim.
Post by: Cuda Cody on December 18, 2017, 01:33:38 PM
@anlauto (https://forum.e-bodies.org/mlist/anlauto_19)  would be the person I would ask. 
Title: Re: Convertible windshield trim.
Post by: anlauto on December 18, 2017, 02:32:05 PM
I use a self adhesive black foam...
Title: Re: Convertible windshield trim.
Post by: Rich G. on December 18, 2017, 07:11:58 PM
Thanks, I'll have to find some.
Title: Re: Convertible windshield trim.
Post by: anlauto on December 18, 2017, 07:14:26 PM
Look in the truck accessory of your local auto parts store...I use the stuff that seal a truck cap to the box...
Title: Re: Convertible windshield trim.
Post by: Rich G. on December 19, 2017, 12:37:11 PM
Is the stuff you use sticky on both sides? I remember having to pry it off. Or did the foam just melt on?
Text only | Text with Images